Backflow is a potentially dangerous plumbing issue that many people don’t know about until it happens to them. This issue can leave a house with contaminated or polluted drinking water, which is more than just a mild inconvenience. Therefore, this is why Backflow Testing is so imperative in {{lpg_city}} {{lpg_state}}

Unaddressed backflow issues can be hazardous to a homeowner’s health, which is why we recommend immediate plumbing service in these situations.

Certified Plumbing of Brevard is a highly-experienced full-service plumbing company focused on providing quality service to {{lpg_city}} {{lpg_state}}. We are here to help home and business owners with their backflow testing & prevention needs.

Essentially, backflow occurs when anything other than water is forced through the pipes to bring clean, potable water into your home. For example, if someone flushes a toilet with city water, it might be pumped back into the clean water line.

In general, anything from chemical spills to sewer gas can enter the clean water supply through backflow. Chemical spills are a serious issue that can create a severe hazard for those who consume contaminated water or even use a hose connected to a contaminated line.

Backflow Prevention Services offers testing and installation of devices to prevent contamination due to backflow in your home. Water service lines have check valves built into them for this purpose, but these valves often fail over time, needing replacement. That’s where our technicians come in – we’ll do an inspection and let you know whether any such issues exist with your system and repair it if they do. We also provide regular inspections of private fire protection backflows as well as irrigation systems.

One of the most critical services provided by a water treatment company is backflow testing and installation. The service ensures that our drinking water is free of cross-contamination, which can happen due to shifting pressure in pipelines, malfunctions in city piping, aging pipes or valves, fluctuations in atmospheric pressure, or other factors. When there are issues with your irrigation system or hydrant that allow untreated water into the mainline to supply clean water to your home, you need to fix it immediately. Otherwise, you run the risk of contaminating your entire home’s supply of drinking water. Many homeowners fail to understand why testing for this type of contamination is essential until they have already had an issue with their tap water being contaminated by dirty irrigation springs.

Backflow is a term used within the plumbing industry to describe a reverse flow in the piping of your potable water system. Backflow happens when there is an interruption or failure in the average flow direction, allowing contaminated or sewage water to contaminate the clean freshwater supply.

How does it happen? Backflow can occur under different circumstances and in many forms. Any time a negative pressure-created backflow can result even if nothing appears wrong with the installation at first glance. The most common way that backflow occurs, however, is through a cross-connection.

An unsafe cross-connection includes any direct or indirect connection between the potable water system and a source that might contaminate the potable water. One such example is when irrigation/lawn sprinkler systems are connected to the public (municipal) drinking water supply, called “backflow.”

Backflow testing and installation should be completed by a certified backwater technician who takes careful measurements and follows specific procedures to test for these dangerous conditions to ensure that they do not put anyone at risk.

Backflow occurs when contaminated sewage waste enters the waterline. As such, this water line is essential for bathing, drinking, dishwashing, and showering, so this contamination can be deadly.
For example, backflow is usually indicated by:

• Water with a foul, sulphuric odor
• Dirty, brown or yellow water
• Sediment or rust is visible in the water
• Drinking water has a nasty, metallic taste
• Drains are working slower than usual
• Flow from faucets is sporadic or slow

If a homeowner notices any of these signs, it could indicate backflow. Moreover, any time sewage or sediment appears to have contaminated the waterline; a homeowner should immediately seek help. In this case, a certified backflow specialist can survey the piping in the home or business to look for signs of backflow.

Backflow is a severe problem that can be easily prevented if one does not allow any unauthorized entry between the water main and the irrigation/sprinkler system. In other words, backflow can occur when someone fails to disconnect the irrigation/sprinkler system from the municipal water supply before working on the sprinkler lines. Common problems include broken sprinkler heads or leaking risers.

When a municipality performs work on a street, a leading valve will typically be turned off, stopping the flow to homes and businesses downstream of that valve.

Suppose your irrigation/sprinkler system is connected to the same water supply as the rest of your home. In that case, it is strongly recommended that you hire a professional to check and test backflow prevention devices annually. A trained professional will ensure the protection of every structure on the property should someone inadvertently disconnect from the mainline before working on sprinkler lines.

It is crucial for homeowners who have irrigation/sprinkler systems connected to their home’s water supply to know how backflow works because everyone can be affected by this problem. When people work on sprinkler systems, they often forget to shut off the valve before beginning work, so backflow testing ensures that any damage caused will not affect your entire house. Installing a new or repairing a leaking sprinkler system is essential for your anytime.

Backflow happens when there is a difference in pressure between the municipal water supply and the irrigation/sprinkler system, causing water to flow into a structure rather than out of it. This can cause problems such as contaminated water spraying into a structure due to an increase in pressure or contaminated water being drawn back into the mainline if there is an area where the pipe has rusted away enough to allow reverse osmosis. The result of either problem could be extremely costly to repair or may even undermine health.

Most modern pipes usually have a backflow prevention device that prevents hazardous materials from entering the water supply.

A backflow prevention device has a shutoff valve that stops water flow once backflow is detected. This device has many moving parts, meaning a backflow specialist should inspect it every year to ensure proper functioning.

Another type of backflow prevention system is the check valve. A check valve is a one-way flow valve that only allows water to flow in a single direction. Thus, if water or sewage flows from the opposite direction, the valve will not allow it to pass.

Backflow devices cannot function forever, so it is necessary to have a backflow testing specialist examine them. These devices need to be in good shape to prevent contamination and pollution. The state of Florida requires that these fixtures are inspected and maintained annually.

At Certified Plumbing of Brevard, we specialize in backflow prevention services. Our plumbing experts are backflow certified, meaning they have the necessary training required to address backflow situations.

Our team of experts can address any backflow issues, no matter how big or small they might be. We can install new valves and backflow prevention devices in the place of old ones. Our experienced crew can prevent and diagnose backflow issues, keeping any home or business safe.

Backflow can contaminate drinking water and bring it into your home. That’s why you should never try to fix your backflow problems; unless, of course, you want your whole family to be poisoned.

A backflow prevention device is a type of safety interface that keeps the water in your home separate from the water that goes into your household. The device can protect you in many ways, too. During disasters like fires or earthquakes, people often get drinking water from their sinks or outside faucets. But what if there’s no power? You could be without clean drinking water for days! A backflow prevention valve would ensure your family has access to a clean piping system even when problems with the city supply.

In {{lpg_state}}, a certified backflow testing specialist must install and test backflow prevention devices in homes or businesses. This requirement was put in place in 1990 by the Florida Building Code, meaning that it is essential that homeowners undergo this process.
A certified backflow specialist is necessary because they can:

• Diagnose backflow issues quickly and efficiently
• Prevent contamination or other hazards
• Isolate the problem, so it does not escalate
• Get clean water flowing through the line again
• Install a backflow prevention device to prevent future issues

Backflow prevention is such a critical process because it stops backflow from contaminating drinking water sources. Backflow specialists must have backflow prevention certification for this reason. The accreditation takes over 32 weeks to complete, requiring plenty of hands-on practice and experience.

At Certified Plumbing of Brevard, we are not only up to date on this crucial course, but we are also highly experienced backflow specialists. We have been in business for 33 years, giving us plenty of expertise in addressing and diagnosing plumbing issues.

Our highly experienced team is here to address any backflow prevention issues you might be experiencing. We will get clean water flowing into a home or business as quickly as possible, keeping home and business owners healthy and safe.

If homeowners suspect they are having backflow issues in their home, they should immediately call a backflow specialist.

Even if there are no direct symptoms of backflow present, homeowners should call a plumbing specialist. The specialist can survey the backflow prevention device, checking it for potential imperfections or issues.

Backflow issues can be costly and time-intensive to fix if not immediately addressed. By quickly remedying the problem, a homeowner ensures that they do not contaminate their water supply.

Also, fixing backflow issues can benefit a community, as it prevents drinking water contamination, which can have a deadly impact on the population.

Certified Plumbing of Brevard knows how to address backflow issues in homes, businesses, and hospitals. We can help homeowners get to the root of the problem, fix contaminated plumbing systems, and ensure future problems do not arise.

Our thorough inspection of backflow prevention devices and piping can help homeowners avoid contamination and keep water safe to use and drink. Our examination is comprehensive, giving us insight into the full scope of the plumbing issue at hand.

We understand that backflow issues can be a hassle for homeowners. Plumbing and water contamination is a stressful ordeal, and we are here to help homeowners every step of the way.

Our thorough services can help homeowners best address the plumbing issues, providing comprehensive solutions to their plumbing issues. Our service ensures a job well done, as we are focused on delivering quality work to our clients.

Unfortunately, there are some situations where backflow does occur. Even if there are preventative measures in place, those systems can eventually fail if not maintained properly.

If a homeowner finds themselves in a situation where backflow has occurred in their home, there are some steps they can follow to prevent further damage.

1. Turn off the water: If a homeowner notices that their water is contaminated, they should turn the water off immediately. Backflow should be treated as an emergency since it brings contamination with it, as well. This type of situation calls for the immediate shutoff of water to the entire property. Using water despite contamination could lead to sickness or other hazards.
2. Turn off the water heater: If the water is off, a homeowner should turn off their water heater as well. Keeping a water heater on while the water is off could lead to potential explosions or fires due to gas buildup. If there is no water flowing through the water heater, it could lead to a potentially dangerous situation. To avoid this, homeowners should turn the water heater and the water at the same time.
3. Call Certified Plumbing of Brevard: Since this is an emergency, a homeowner should call Certified Plumbing of Brevard immediately. Our emergency plumbing services can help homeowners get clean water flowing into their homes as soon as possible.

At Certified Plumbing of Brevard, we can help make our backflow prevention services as efficient as possible for the property owner. Our team of plumbing specialists is happy to help property owners with any of their plumbing needs.

Our customer service and transparency have helped us serve Brevard County for 33 years. Chiefly, we know our community inside out, and we’d be happy to provide the quality plumbing service Brevard County deserves.

We service large homes, hospitals, and businesses, making it easy for property owners to have peace of mind that a plumbing expert will repair their extensive plumbing system. The size or scope doesn’t deter us; we offer quality service no matter how large or small the property is.

We would love to help you with your backflow prevention and plumbing needs. To make things easier for you, we offer traditional and 24/7 service. Whether you need a free quote or emergency repair services, our expert team is here to help.

If you have any questions about our backflow prevention process or quotes, you can give us a call at (321) 676-0812. We would love to help you with all of your plumbing and repiping needs.